Make a brand kit from your logo: its colours in five roles, two fonts and your voice, with contrast checked for every pair, then download a brand sheet or save the kit to HueFold.
Updated
A brand kit is the short list of colours, fonts and rules that make everything a brand puts out look like it came from the same place. The quickest way to make one is from your logo: this tool reads the logo's colours in your browser, picks five colour roles from them, lets you choose a heading font and a body font, and checks which text colours are readable on each colour.
From the sample mountain logo it found six colours and built a kit whose best text pairs reach 16.43 : 1. Download the brand sheet, the CSS variables or the kit file, or save the kit to your HueFold account for the editor's AI design.
Colours read from a logo, a heading font chosen, a colour swapped for one from the logo, the contrast table, and a second kit made from a café wordmark.
Drop your logo on the tool, or choose one of the two samples. The page reads the logo's colours, picks five colour roles from them, and draws a brand sheet: the logo and name, the five colours with their codes and contrast, your heading and body fonts, and the kit used on a post and a card. Change any colour, pick the fonts, write a line about how your brand sounds, and the sheet redraws as you go.
When it looks right, download the brand sheet as a PNG, the colours and fonts as CSS variables or a kit file, or sign in and save the kit to your HueFold account, where the editor's AI design panel can use it.
Every pixel of the logo is counted in your browser, leaving out see-through pixels and the plain backdrop a logo is often saved on (a colour that covers most of the logo's edge, such as white). Shades that are very close are counted as one colour, the colour of their average, so the anti-aliased edge of a shape does not become a colour of its own; anything used by under 1% of the logo is left out.
The mountain logo gave six colours, most used first: #533ac2 (31%), #14562e (24%), #10182b (13%), #7a3be3 (5%), #333a9f (4%), #fde047 (3%). A gradient, like the logo's purple sky, is spread over many shades, so the tool sorts the colours by how much of the logo each one covers once its shades are merged, not by the first one it finds.
Primary is the logo's most used colourful colour. Secondary is the next one with a clearly different hue (at least 30 degrees round the colour wheel). Accent is the most colourful of the rest that stands apart from both: another hue, or a clearly darker or lighter shade of the secondary's. Dark and Light are the logo's own darkest and lightest colours when they are dark or light enough for text and backgrounds.
When the logo has no colour for a role, the tool makes one from the primary's hue, and labels it made rather than from logo: the mountain logo has no near-white, so its Light is a pale tint of its purple. Click a role, then any colour found in the logo, to use that colour instead, or pick any colour with the colour picker.
For each colour in the kit, the tool measures dark text and light text on it with the WCAG 2 contrast formula. 4.5 : 1 is the minimum for body text (level AA), 7 : 1 is level AAA, and 3 : 1 is enough only for large text (18 point, or 14 point bold).
On the mountain kit, light text works on the purple (7.09 : 1) and the green (8.13 : 1), and dark text on the yellow (13.41 : 1); dark text on the purple fails at 2.32 : 1. The brand sheet uses the better of the two on every colour, and shows its ratio.
| Text on colour | Contrast ratio (: 1) | Level |
|---|---|---|
| Dark text on primary | 2.32 | Fails |
| Light text on primary | 7.09 | AAA |
| Dark text on secondary | 2.02 | Fails |
| Light text on secondary | 8.13 | AAA |
| Dark text on accent | 13.41 | AAA |
| Light text on accent | 1.22 | Fails |
| Light text on dark | 16.43 | AAA |
| Dark text on light | 16.43 | AAA |
The second sample is a café's wordmark: an acorn mark and the name Ember & Oak on a transparent background. It gave four colours: #14532d (43%), #3f2a1d (31%), #fbbf24 (13%), #d97706 (12%). Green became the primary, yellow the secondary and the darker amber, close in hue to the yellow but clearly darker, the accent; the brown of the lettering became Dark, and Light was made.
The contrast check found something worth knowing: neither dark nor light body text is readable on that amber. Dark text reaches 4.22 : 1 (large text only) and light text 2.97 : 1, which fails. So in this kit the amber is for shapes, highlights and big headings, and body text goes on the green, the yellow or the light background.
Eleven, all served by HueFold from its own copies of Google Fonts: Montserrat, Poppins, Quicksand, Raleway and Oswald (sans serif), Playfair Display, Lora and Merriweather (serif), Anton and Abril Fatface (display) and Inconsolata (monospace). Pick one for headings and one for body text; the sheet shows both at size.
A common pairing is a serif or display face for headings with a plain sans serif for body text, such as Playfair Display with Montserrat. The CSS file names each font with a fallback of its kind (a serif falls back to Georgia, a sans serif to the system font), so a site that does not load the font still looks close.
It is a line or two about how your brand writes, kept with the kit so everyone writing for it has the same note: for the café, “Warm and plain-spoken. Short sentences, no jargon.” Up to 300 characters.
The voice is saved with the kit and is part of the kit file. HueFold's AI design currently takes the kit's colours and fonts; it writes its own text, so treat the voice as guidance for the people writing, not as an instruction the AI follows.
The sheet is a 1600 × 1000 PNG: the logo and name at the top, with the voice under the name; the five colours as tiles with their hex codes and the contrast of the text on them; the heading font and the body font at size; and the kit used on a square post and a card, so you see the colours working together. The mountain kit's sheet came to 162.5 KB.
It is made to be dropped into a brief, a shared drive or a chat, so anyone making something for the brand can see the colours, codes and fonts at a glance.
Yes. CSS variables saves a stylesheet of 10 lines with --brand-primary, --brand-secondary, --brand-accent, --brand-dark and --brand-light as hex colours, and --brand-font-heading and --brand-font-body with their fallbacks, ready to paste into a site's styles.
Kit file (.json) saves the name, the five colours with every colour found in the logo as a palette list, the two fonts and the voice, in the same shape HueFold stores a saved kit in. Keep it as a record, or send it to whoever builds your site.
Press Save to my brand kits and sign in if you have not. The kit's name, colours, palette, fonts and voice are saved to your account; your saved kits are listed under the button, with the default marked, and Make default sets which one the editor picks first. Saving again after a change updates the same kit.
How many kits an account can keep depends on its plan. If you have reached it, the page shows HueFold's own message rather than saving, and nothing is lost: the kit is still on the page to download.
In the editor, the AI design panel has a Brand Kit menu listing your saved kits, with your default kit picked already. When you generate a design with a kit chosen, HueFold sends the kit along: the new designs take their colours from the kit's palette and their headings and body text from its two fonts.
Kits saved from this page carry their colours in the shape HueFold's AI design reads (the five roles plus the palette list), so the colours you chose here are the ones it uses.
No. The logo is opened and measured by your browser, and the sheet is drawn there; the logo itself is not sent to HueFold, even when you save the kit. Saving sends only the kit's name, colours, fonts and voice.
PNG, JPG, WebP and SVG logos all work. An SVG is drawn by the browser first, so its gradients and transparent parts count as they look.
Use the cleanest version of your logo you have: a PNG with a transparent background, or an SVG, rather than a photo of a sign or a screenshot. A photo gives dozens of colours from light and shadow that are not part of the brand.
Keep the kit small: two or three brand colours plus a dark and a light are enough for almost everything. Check the contrast table before you choose text colours, and keep colours that fail for body text, like the café's amber, for shapes and large type.
Yes. Making the kit and downloading the sheet, CSS and kit file need no account. Saving the kit to HueFold needs a free account.
PNG, JPG, WebP or SVG. A transparent PNG or an SVG gives the cleanest colours.
Five roles (primary, secondary, accent, dark and light) plus every colour found in the logo as a palette.
The logo had no colour for that role, so the tool made one from the primary colour’s hue. Swap it for any colour you like.
With the WCAG 2 formula. 4.5 : 1 is the minimum for body text, 3 : 1 for large text, 7 : 1 is the stricter AAA level.
Eleven: Montserrat, Poppins, Quicksand, Raleway, Oswald, Playfair Display, Lora, Merriweather, Anton, Abril Fatface and Inconsolata.
No. It is read in your browser. Saving a kit sends its name, colours, fonts and voice, not the logo.
It depends on your HueFold plan. If you reach the limit, the page shows HueFold’s message and keeps your kit on the page.
In the editor’s AI design panel: choose the kit, and new AI designs take their colours and fonts from it.
Yes: download the CSS variables and paste them into your site’s styles.